Maxseal Flex M 15kg Handipak V2

Introducing the Drizoro MAXSEAL® FLEX-M 15kg Handipak: The Perfect Waterproofing Product for Your Water-Retaining Structures

The Drizoro MAXSEAL® FLEX-M 15kg Handipak is the latest innovation in waterproofing solutions by Drizoro and is brought to you courtesy of Scientific Waterproofing Products.

Designed to provide superior protection against water ingress, this product is a convenient repack of the 22kg bag, and now includes an application brush for easier and more effective application.

In this article, we will explore the benefits and application procedure of the Drizoro MAXSEAL® FLEX-M 15kg Handipak, the significance of the inclusion of the application brush in the application process, and the advantages that our product can provide.

About the Drizoro MAXSEAL® FLEX-M 15kg Handipak

Water can be destructive to structures, especially if they are exposed to extreme weather conditions and other damaging external factors.

The concrete, blockwork, mortar, fibre-cement panel, permanent formwork and brickwork  which they are often made of can also easily deteriorate when water penetrates the surface.

Fortunately, the Drizoro MAXSEAL® FLEX-M 15 Kg HandiPak is a cement-based waterproofing product that once mixed only with water provides a high-performance protection of concrete, blockwork, mortar, fibre-cement panel, permanent formwork and brickwork against positive and negative pressure.

The product, which is backed by a 10-year product warranty, is a particularly beneficial waterproofing solution as it:

1. meets Australian Standards 4654 and 4020
2. is fully submersible and must be applied to a wet surface
3. can withstand both positive and negative hydrostatic pressure
4. is made from high-quality raw materials and is UV-stable
5. withstands atmospheric pollution and the most severe conditions
6. is an excellent barrier against CO₂ and chlorine (Cl-)
7. is non-toxic, environmentally friendly and suitable in poor ventilation areas

Where to use the Drizoro MAXSEAL® FLEX-M 15kg Handipak

To help you safeguard your projects from water-related damage, Drizoro MAXSEAL® FLEX-M 15kg HandiPak can be applied across all of the following scenarios:

• waterproofing and protection of water retaining structures, such as potable water tanks, reservoirs, dams, water channels, fountains and swimming pools 
• waterproofing of below-grade structures like basements, retaining walls, foundations and tunnels
• waterproofing galleries subject to high negative water pressure 
• waterproofing and protection of concrete waste-water treatment plants, settlement tanks, etc
• waterproofing and protection of concrete structures such as civil works, bridges, architectural buildings and residential facades against carbonation and marine environment
• waterproofing and protection of concrete against soil salts and aggressive groundwater in underground jobs, foundations, etc.
• waterproofing concrete roofs, terraces, balconies, etc.
• waterproofing of planter boxes, gardens and other surfaces subject to root penetration.

The Added Benefits of the Drizoro MAXSEAL® FLEX-M 15kg Handipak

The addition of the application brush to the brand new and larger MAXSEAL® FLEX-M 15kg Handipak was a strategic decision to enhance the user experience of the previous product and ensure optimal product performance.

The added MAXBRUSH allows for precise application, ensuring that the waterproofing material is pushed deeply into pinholes, hairline cracks, and other small gaps up to 3mm wide that might otherwise be missed with a roller.

How to apply Drizoro MAXSEAL® FLEX-M 15kg HandiPak

To make the most of the new features and to achieve these excellent results from the Drizoro MAXSEAL® FLEX-M 15kg HandiPak, you must first understand how to properly optimise your waterproofing product.

Here’s a step-by-step guide to positive or negative-side waterproofing:

Surface preparation:

1. The surface to be coated must be sound, clean, and free of loose materials.
2. Any damage or concrete defect like holes, voids, honeycombs, and cracks should also be repaired in advance using MAXREST® .
3. Since Drizoro MAXSEAL® FLEX-M 15kg HandiPak can only be applied to a wet surface, no primer or other product is required prior to its application.

Application:

1. Apply MAXSEAL® FLEX-M 15Kg HandiPak using the included MAXBRUSH to spread a homogeneous and continuous coating with a thickness of 1mm approximately.
2. Apply the first coat at a rate of 1 – 1.5 kg/m². Allow a drying time of a minimum of 6 hours and a maximum of 24 hours, then apply the second coat in a perpendicular direction between coats for a total consumption of 2 – 3 kg/m².
3. Once the first coat has been applied with the included MAXBRUSH, and while still wet, the second coat can be rolled over for a textured finish.

Curing:

1. Curing time for putting into service and water immersion is 5 days at 20ºC and 50% R.H. Take note that applications at lower temperatures or higher R.H. will increase the curing time. 
   
2. In the case where tanks are used for potable water, once MAXSEAL® FLEX-M 15kg Handipak is cured, wash the surface with water at low pressure before filling.

Get the right specification of waterproofing products for your next project.

At Scientific Waterproofing Products, our team is here to provide you with the most effective waterproofing product for your unique project.

We offer a wide range of Drizoro cement-based waterproof coatings that are made from high-quality raw materials and backed by a 10-year product warranty.

If you’ve got any questions or issues around your next waterproofing job, or you’d like to find out which product is best for your project, contact us today. 

You can also check out a list of local Drizoro resellers and applicators here. As always, SWP is committed to providing the right waterproofing solution for any water-related problem or application.