0

SEALING CONCRETE/BLOCKS OR BRICKS WITH EFFLORESCENCE

Specs 26

PRODUCTS REQUIRED

Choose one

Choose one

Choose one

IMPORTANT

  1. Always test EFFLORESCENCE RID on surfaces prior to application as some surfaces can become bleached.
  2. If substrate cracks or is damaged after application, efflorescence may return

APPLICATION REMINDERS

  1. Remove all existing salt deposits mechanically before treatment
  2. Do NOT use pressured water once efflorescence is treated
  3. Do not rinse EFFLORESCENCE RID between applications, only after final application
  4. Substrate must be below 15% moisture before application of SEALTIGHT

METHOD

  1. Prepare the area by mechanically removing all loose material and existing salt deposits, ensuring the substrate is clean, sound and porous.
    NOTE: Pressure water blasting is not recommended, as it may draw additional salts to the surface.
  2. Spray EFFLORESCENCE RID onto substrate starting from the top working across and down, and allow the product to foam.
  3. Once the foaming action has stopped, spray again from the top working across and down. DO NOT rinse between applications.
  4. Repeat spraying EFFLORESCENCE RID onto substrate until foaming no longer occurs. DO NOT rinse between applications. It is essential that salts are extracted from within the substrate and not merely removed from the surface.
  5. Once the surface has dried to a moisture content of less than 15%, verified using a suitable moisture meter, spray SEALTIGHT at 1 litre per 4-5m2 (depends on porosity, texture, and condition of substrate), to saturation (just prior to running off the surface) using a low-pressure sprayer at no more than 20psi.
  6. Remove excess SEALTIGHT after 25 minutes using a damp sponge, cloth, or mop.
  7. Allow SEALTIGHT to penetrate and cure for 24 hours.
  8. DO NOT spray a “second coat” after first saturation, as this will not penetrate, leaving a flaking film when dry.

IMPORTANT

All products must be used in accordance with the current Technical Bulletins and specific project requirements, including requirements relating to dimensions, surface preparation, mixing, and application.