0

WATERPROOFING SEWER ACCESS CHAMBERS

Specs 26

PRODUCTS REQUIRED

Choose one

Choose one

Out of stock

Choose one (Drizoro Waterproofing Membrane)

Out of stock

Out of stock

Out of stock

Out of stock

IMPORTANT

If efflorescence is present, please contact our office before applying any waterproofing products for further advice.

APPLICATION REMINDERS

  1. Apply DRIZORO WATERPROOFING MEMBRANE in two coats and reinforce the junctions with MAXMESH
  2. Thoroughly wet the surface before each application of DRIZORO product

CURING TIME BETWEEN COATS

MAXSEAL FLEX 16 - 72 hrs
MAXSEAL FLEX M 6 - 24 hrs
MAXSEAL FLEX EXPRESS 1 - 24 hrs
MAXSEAL FOUNDATION 14 - 24 hrs
MAXSEAL SUPER 6 - 24 hrs

CURING TIME

MECHANICAL LOADING WATER IMMERSION
MAXSEAL FLEX 7 days 14 days
MAXSEAL FLEX M 3 days 5 days
MAXSEAL FLEX EXPRESS 2 hrs 72 hrs
MAXSEAL FOUNDATION 3 days 7 days
MAXSEAL SUPER 3 days 7 days

WATERPROOFING DETAIL

METHOD

  1. Prepare area to be treated by removing all render, paint and any loose material ensuring a clean and sound surface.
  2. Wire brush rusted reinforcing and apply MAXREST PASSIVE as per Technical Data Bulletin.
  3. Repair any spalling, voids, honeycombing, cracks or surface defects greater than 3 mm using MAXREST or MAXRITE 700 to achieve a sound, even substrate prior to waterproofing ensure you wet the surface.
  4. Joints larger than 3 mm will need MAXJOINT ELASTIC or MAXJOINT ELASTIC EXPRESS (as per Joint Sealing Specification).
  5. Thoroughly wet the substrate, brush apply 1st coat of DRIZORO WATERPROOFING MEMBRANE at 1 kg per m².
  6. While the first coat remains wet, embed the 200mm wide MAXMESH centrally over the wall-to-floor junctions and all internal vertical control joints where two walls meet and lightly cover the MAXMESH with DRIZORO WATERPROOFING MEMBRANE and allow to cure (as per curing time table).
  7. Thoroughly wet the substrate with water until it is glistening wet (without free-standing water). Brush apply 2nd coat of DRIZORO WATERPROOFING MEMBRANE at 1kg per m², allow to cure (as per curing time table).
  8. Repair active leaks with MAXPLUG as per Technical Data Bulletin.
  9. Apply 2 coats of DRIZORO WATERPROOFING MEMBRANE at 1kg per m² per coat over the MAXPLUG, allow to cure (as per curing time table).

IMPORTANT

All products must be used in accordance with the current Technical Bulletins and specific project requirements, including requirements relating to dimensions, surface preparation, mixing, and application.