Site Overlay

Sealtight

SEALTIGHT


Technical Brochure | MSDS | Specifications
| What makes SEALTIGHT different to other sealers?

ADVANCED WATERPROOFING SYSTEM BASED ON A SCIENTIFIC BLEND OF INGREDIENTS -ENVIRONMENTALLY FRIENDLY

 DESCRIPTION:

SEALTIGHT- is not a surface coating, but a penetrating colourless, inorganic transparent liquid- non-toxic, non-caustic, non-flammable, inorganic scientific formulation.

It permanently waterproofs, insulates, hardens and preserves concrete, plaster, mortar and most natural stone.

The scientific formula causes a reaction that solidifies the component parts of  masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Increases the density of the substrate, increases wear capability, will prevent dusting, brick fretting, cracking.

SEALTIGHT applied to the masonry, concrete, plaster and render will penetrate and by a progressive chemical reaction, which is started at the surface, binds all component parts of the masonry into a more dense or solid mass. As this reaction takes place, all free lime and alkali are neutralized. As the masonry increases in density it becomes waterproofed, resistant to acid, oil and grease.

APPLICATION FIELDS:

  • All masonry construction old or new concrete, bricks, blocks, plastering/render.
  • Above or below ground. Concrete floors, walls, terrazzo and most natural stone.
  • New or old constructions affected by pollution, monuments, public buildings and roads, tunnels, basements, swimming pools decks, dams, subways.
  • For sealing Showers and other wet areas.
  • Sealing substrates prior to painting – rising damp barrier.
  • Tilt Up Panels
  • NOT FOR USE ON PRECAST CONCRETE BLOCKS

Technical

 APPLICATION FIELDS:

  • All masonry construction old or new concrete, bricks, not Besser blocks, plastering/render.
  • Above ground, not recommended for below ground.
  • Concrete floors, walls, terrazzo and sandstone and most natural stone.
  • New or old constructions affected by pollution, sealing monuments, public buildings and roads, tunnels, basements, swimming pools decks, dams, subways.
  • For sealing Showers and other wet areas.
  • Sealing substrates prior to painting – rising damp barrier.
  • Tilt Up Panels

 ADVANTAGES:

  • Protects weak and old substrates.

Prevents blistering and deterioration of paints, does not contain oils or solvents.

  • Does not require special protection. Safe for the user and environment.
  • Non-corrosive, non-toxic and non-flammable.
  • NOT classified as hazardous material. Environmentally friendly.
  • NO  bonding problem for paint, glue, render.
  • NO harm to aluminium, glass, tiles etc.
  • Permanent waterproofing, preservation and protection.

Important Caution

SEALTIGHT is not a surface treatment but a concentrated saturant which will penetrate any porous surface. If the surface absorbs water it will absorb SEALTIGHT.

Should not be applied to any surface with a previous coating of silicone, siloxene or solvent-based material.

SEALTIGHT IS A PENETRATING PRODUCT.

If you see that is not being Absorbed. It should not be applied.

Select a small test area, if water/sealer does NOT penetrate the surface DO NOT apply.

If sealing grout lines, remove any overspray from surrounding areas immediately.

Any surface excess must be spread over areas NOT saturated or removed using sponge or mop within 3 minutes.

Any spillage, overspray or excess surface application or application to NON-Porous material (glazed tiles etc.) MUST be removed immediately. To paint over a Sealtight treated area use only a good quality acrylic, oil-base, epoxy or urethane paint. Do not use latex or rubber based paint.

Tecnical data Brochure will be updated shortly to reflect this new information.

Unsolicited Endorsement

James Bradley

Carpentry and Building Services

James_bradley90@hotmail.com 

ABN 44521003816

3 Malahide Road Pennant Hills 2120 NSW

Dear SWP ,

It was by chance that I happened to drop into your business to purchase the usual waterproofing product, that requires 2-3 coats with all the curing time, plus careful not to damage the membrane while tiling etc .

Your sales rep gave us some demonstrations, which made me decide to give your product a go!

SealTight I found was very easy to use and seems to do what it claims ,to water proof cement Board and flooring , this one coat system I feel will be a asset in my work of water proofing all wet areas .

If you want a builder to endorse the product, you have my endorsement.

Congratulations on a top product.

James Bradley